Small booth to larger space?

In some large-scale exhibitions or venues, often with some exhibitors spread to smaller display space, insufficient lighting or lighting plus, causing difficulty in the design of the booth. This requires the booth designers try various devices to change the unfavorable conditions and factors, otherwise it will cause the entire exhibition failure. How to use the existing adverse conditions get better display effect? First of all, the designer should like architects, design, organization and control of spatial skills, make small booth change "". Specific can adopt the following measures:
In order to make the booth "shine", the box type structure.
Using the K8 system (eight prism display) or three plug-in framework, inlaid white organic glass, the internal installation of straight tube fluorescent lamp, can make the booth was transparent, very light and lively, and stand out, can attract the audience's attention.
2, exhibition environment can adopt the integral photos and pictures of combination.
Such as the exhibition hall is low, grille lamp can be installed in a group on the ceiling, in rows or grid. Or use a light tank lighting illuminated ceiling. Also can use the straight tube type fluorescent lamp make luminous ceiling of large area. Can use the advanced "El" lighting technology, make the whole venue ceiling, wall and the floor lights up. In addition, against the wall in the back and bottom of the showcase, booth in the lower part, the installation of straight tube fluorescent lamps or neon lamp. In this way, the booth will feel relatively wide, tall, change the original depression, boredom.
3, space interface and display channel should choose white or pale pretty colors.
White and light beautiful color for wall roof surface or props and partition appearance, will increase the space in a broad sense. But with the deep color, can make a person feel cramped, melancholy mood dejected.
4, in the booth design with small scale. In the smaller space, will not be booth body and display props up too large, but should be coordinated and exhibition space scale. In the scale selected should be above scale basis, to let the audience feel warm and comfortable.
5, reduce the number of items to display. Exhibition hall, exhibits density must be small, less, while channels to be generous, to ensure the personal safety of the audience and the exhibition hall is spacious. 6, put the other should be concise and exhibits strong integrity. Whether the image exhibits booth, or other props appearance, to try to "whole" and "Jane" absolutely avoid miscellaneous and trivial shape, must be clear, concise, generous, let a person see mood. This is an important point.
7, use less or no decorative patterns. Hall small, not many large scale and strong color strong patterns, because off these patterns can let a person feel the exhibition hall "change" smaller, and will take. Available at the individual patterns (such as mark, flower, flowers etc.). If the non use of large area patterns can not, must use small Suihua pictorial, and color to light.
8, use concise and focused approach.
In the small room display, must be selected exhibits, choose the most typical and representative; and it should be treated differently, prioritize these exhibits, the display modes, lining color selection, lighting quality and artistic style, should be different, and not follow the same pattern form.